Image of flat-nose jewelry pliers

Flat-nose Jewelry Pliers:

Flat-nose pliers are a staple item for making jewelry.

My choice:

Beadsmith #PL316

I mainly create with 16ga or 18ga jump rings and I like to form with 16 or 14ga wire or even 20ga sheet, so I prefer to use pliers with a good grasp.  I also like that the width of these pliers is 1/4″, which offers a quick way to measure this distance.  These pliers are very affordable, offer a comfortable handle for my larger hands and have proven to be a good work horse on my bench.  I highly recommend flat-nose pliers in this scale to accomplish the projects that I teach.

These pliers are a just a wider version of the chain-nose pliers

As opposed to the tapered jaw of the chain-nose pliers, the flat-nose pliers offer a wider surface near the tip.  This larger area offers a stronger grasp that is less likely to cause a mark in your wire when you are gripping really hard.  There are a lot of various features to consider when purchasing:

  • Length of the handle – If you have larger hands, you probably want a longer handle so the ends don’t dig into your palm as you use them for any length of time.  But conversely, if you have small hands, the shorter handles can be better so you don’t have to spread your hand as much to grip them.
  • Spring/no spring – The spring is located between the handles.  If the pliers have a spring, they will automatically want to open as you release your grip.  If there is no spring, you have to spread them open using the handles.  I personally prefer to have a spring, so that my grip eases slowly as I release my grasp.
  • Ergonomic handles – There are many options with various styles of ergonomic handles to help ease hand fatigue.  The most comfortable style can vary by person.
  • Width of the tips – The more narrow tips can be great for grasping in a small area, but they won’t have the grasping strength that a larger tip has.  So this could be a reason to have various pairs as you grow your tool collection.  I personally like to work with 16ga jump rings and wire so I prefer a bulkier tool (approximately 1/4″ in width).
  • The quality of the joint – The joint where the pliers pivot open and closed (the fulcrum) has a direct relationship to the life-span of the tool.  Typically German-made pliers have a better joint and can last quite a bit longer before the tips don’t meet properly, but they are also more expensive.
  • The “tooth” of the jaw – I do not mean that the jaw of the pliers should have actual teeth like the needle-nose pliers from the hardware store!  I am referring to how polished the surface is.  If you work on very fine items, you may desire a slightly more polished surface so that there is less possibility of  marring the surface as you work.  However if you work with heavier items that you need a strong grip for, a shiny surface in the jaw of the pliers can make the grasp slippery, which can cause more dings from the tool on your work than one that holds a stable grasp.

My choice: Beadsmith #PL316

I mainly create with 16ga or 18ga jump rings and I like to form with 16 or 14ga wire or even 20ga sheet, so I prefer to use pliers with a good grasp.  I also like that the width of these pliers is 1/4″, which offers a quick way to measure this distance.  These pliers are very affordable, offer a comfortable handle for my larger hands and have proven to be a good work horse on my bench.  I highly recommend flat-nose pliers in this scale to accomplish the projects that I teach.

Where to purchase…

You can purchase Beadsmith flat-nose pliers #PL316 through my local jewelry supplier, C&D Silver.  If you aren’t local to Phoenix, AZ, you can call and place an order to be shipped to you.

These and many other styles are available through other jewelry supply sources.  I just like to be sure I am offering you at least one source who carries my recommendation.