Wondering how to use liver of sulfur?
You have a lot of options!
Liver of sulfur is a chemical compound jeweler’s use to speed up the oxidation on the surface of the metal – typically either copper or silver.
As the metal oxidizes, it moves through a rainbow of colors before it gets to a dark matte black.
With a typical mixture, the progression happens quickly – which is ideal if you’re seeking an antiqued look or dark accents to showcase texture or add contrast.
But, if you use a more diluted mixture, you can capture the colors that happen along the way.
The details of the process will depend on your desired result.
Here are the basic steps:
-
Preparing your metal is key for achieving a blemish free patina.
-
You mix the liver of sulfur with hot water: 3-4 drops per cup for dark patina/1-2 drops per cup for capturing colors.
-
Then apply the patina by submerging your metal in the mixture, dipping it in the mixture, or painting the mixture on your piece.
-
Rinse with cold water (or a mixture of water and baking soda) to stop the reaction from continuing.
-
Finish the piece as desired – either polishing or sealing the patina.
Surface preparation is super important!
Typically, you’ll want to start by filing and sanding your pieces with 600 grit emery paper or a 3M super-fine sanding sponge.
If you are looking to capture colors, you’ll want to leave this ‘tooth’ on the surface to provide a good bond for a clear coating to protect the patina.
And if you’re going for the dark finish, you can refine the surface of your pieces as desired either before or after you apply the chemical depending on how much you plan to sand or polish away the patina to reveal the metal below (Keep scrolling to learn more about your options.)
Your metal needs to be clean to achieve a uniform patina. Lubricants and even the oils from your skin can impede the reaction and cause blemishes.
Use a soft bristle brush (like an old toothbrush) to scrub the surface first with Bar Keeper’s Friend Cleanser followed by Dawn dish detergent. Be sure to rinse each thoroughly! Your goal is to have running water sheet off the surface as opposed to beading into droplets. There are other surface prep agents, but these are common household items you are more likely to have on hand or at least be able to source at your local market.
The appropriate recipe for the chemical mixture can vary:
Liver of sulfur comes in a gel form and a nugget form.
Both work well, but I find it easier to work with the XL (extended life) gel. Its shelf-life is more stable and it’s easier to measure. If you prefer to use the nugget form, I recommend looking for it in a metal can verses a plastic container. And you can use a glass mortar and pestle to break the chunks down to use smaller portions.
The strength of the mixture is affected by the temperature of the water as well as the chemical to water ratio. Swirling action can also enhance the coverage. Plus, it’s more effective when it’s freshly mixed. Even if you re-heat it, the strength degrades in a short period of time.
I use approximately 3-4 drops per cup of hot water for dark patinas and 1-2 drops per cup to capture colors. It is helpful to have a spare strip of metal to use for testing the strength – especially if you’re striving to capture colors.
Choose your application method based on your desired result:
If you are going for a dark patina, you can simply submerge your pieces in a full-strength batch for a minute or two until they are completely dark – just be sure to allow for the chemical to penetrate all surfaces either by hanging it or swooshing it around occasionally.
But when your goal is to achieve colorful hues, I recommend using a 3-bath dipping technique:
- Start with hot water to warm your metals. This helps your metal react and reduces the chance of cooling the chemical bath.
- The second bath is the liver of sulfur mixture – a diluted version rather than full strength to slow the oxidation process down.
- And the third is cold water – to help impede the reaction from continuing.
You can add baking soda to the 3rd bath of water to fully neutralize the liver of sulfur – but only if you’ll be wiping the surface. Otherwise, this can cause white spots on your pieces if it is not rinsed off completely.
And if you are targeting specific areas, you can paint it on.
Finishing your piece: polishing verses sealing …
If you have chosen to capture colors, you need to seal them with a lacquer or protective coating to maintain the coloration long-term. Otherwise, the oxidation process will continue naturally over time. (Keep in mind that any clear coating will subdue the colors – especially the reds, purples, and blues – so it’s best not to get attached to those colors.)
If you choose to utilize the dark tone that liver of sulfur is traditionally known for, you have options:
- If you like the matte black look – you can avoid touching the surface, let it air dry and seal it. (Wiping it will remove the depth of the hue.)
- You can achieve a dark blue-grey gun-metal tone by wiping the dark surface and then tumbling it with stainless steel shot (Avoid anything abrasive.)
- You can sand/file/polish off areas to showcase the metal underneath for a 2-tone effect and then tumble with steel shot or wash with dish soap.
- Or you can polish with a compound like water-soluble red rouge on a muslin buffing wheel to reveal the true metal color, leaving just remnants of the dark hue in the deepest recesses – providing an ‘antiqued’ look.
5 helpful tips that apply no matter what:
- Liver of sulfur stinks! Wear gloves to keep it from lingering on your skin and brace yourself. 😊
- If you don’t like your patina, you can remove it – either by sanding it off or heating your piece with a torch. Simply clean up the piece and then you can start over.
- You can use a sharpie marker as a resist
- Liver of sulfur is not effective on gold or items with a coating
- Avoid using with stones or beads other than glass – it’s best to treat your metals first and then add your beads or stones.
Long term care & maintenance for your jewelry with patinas created using liver of sulfur …
It’s important to consider how your jewelry will be cleaned and polished over time.
If you utilize a patina that requires a sealant, these pieces cannot be submerged in water, and they will be sensitive to perspiration and other chemicals associated with a beauty regimen like lotions, perfumes, and hairspray. So, you’ll need to wipe them with a soft cloth for regular upkeep. You can also occasionally wash them with dish soap if you don’t let them remain in the water and you dry them quickly. You won’t be able to tumble them with steel shot or steam clean them.
If you go with the traditional dark options, you can tumble your pieces with steel shot. However, if you use anything with an abrasive, you’ll scratch the dark areas. Even polish cloths will remove the oxidation, so restrict using them to the areas where the copper or silver shines through.
Want to learn more about how to use liver of sulfur?
We’ve got you covered …
In true Jewelry Classes with Jen style, we offer an array of stylish project-based lessons that guide you through the process of crafting stunning pieces.
Our easy-to-follow instruction provides in-depth coverage you won’t find anywhere else. You’ll find answers to ‘why’ as well as ‘how’ so you’ll be well-equipped to use liver of sulfur creatively for your own designs as well.
Get started with our FREE ONLINE COURSE – Colorful Copper Earrings
Step-by-step instruction on how to use liver of sulfur to achieve beautiful colors ~
This course walks you through 3 options:
- Dipping method for achieving graduated ombre hues
- Using a resist for bright copper accents
- Double dip process for rich bronze tones with dark accents
The 9-video series is completely free to watch.
Provide us with your name and email and we’ll send you the written instruction bundle including:
- A convenient supply list with links for more information
- Notes on prepping copper blanks: punching holes, filing, and sanding
- General instructions for achieving all 3 effects
- And project sheets with guides to follow for applying the resist
Plus, you’ll get a special discount code for copper blanks from Twisted Turtle Studio.
All the information you need to make your own copper earrings with a colorful patina using liver of sulfur is included in this free course!
Plus, you’ll find a fundamental lesson on preparing a classic shaped blank with great tips like easy ways to center your holes for various shapes, proper filing techniques, and sanding guidance.
And if you’re looking for more insight into achieving a bronze tone on your copper components using liver of sulfur, there’s a video covering that as well.
Delve deeper into the art of using liver of sulfur for jewelry with the lessons offered in the Jewelry Classes with Jen Learning Center.
For an affordable monthly subscription, you can become a member and get access to our extensive online library of top-quality jewelry making instruction including stylish projects featuring various techniques for incorporating a patina using liver of sulfur.
Our ‘Build Your Foundation’ series covers jewelry making basics like no other.
You can learn:
- How to achieve the 3 effects from the colorful copper earring course on your own designs
- Various methods for sanding and polishing pieces with a dark patina
- How to use the painting method to add a swath of color
And you’ll love the practical guidance offered in the Learning Center too!
Topics covered that relate to using liver of sulfur include:
- Using liver of sulfur to minimize the long-term care and maintenance of your handmade jewelry.
- How to add contrast and dimension to your work
- Time-saving techniques that look great
It’s worth joining just to be inspired!
You’re in?
Here are some other articles you may find interesting …
DIY Copper Christmas Ornaments and Gifts
DIY Copper Christmas Ornaments (and Holiday-themed Jewelry): Make personalized gifts for your friends and family.Festive holiday themed copper blanks + Colorful patina on copper = Super cute gifts for under $5!I found these great shapes through Twisted Turtle Studio …...
How to Design Earrings: A practical guide for beginner jewelry making
Considering ideas for DIY earrings? There’s a LOT more to ponder than you may realize. Here’s what you need to know:Visually frame the face with your design…A “pair” of earrings should be a symmetrical set or at least have a cohesive balance. Many people don’t think...
Best Earring Findings for Your Handmade Copper Earrings
When you are learning how to make copper earrings, you typically want an earring finding that matches. Unless you have some silver accent elsewhere in your design, it’s likely you’ll want an earring hook which is either a copper or a dark hue, so it blends in nicely...
How to Seal Copper Jewelry
How to seal copper jewelry: Once you make a fabulous piece of copper jewelry with a stunning patina, it’s important to protect the patina by sealing it. Applying a protective layer on your patina surfaces will change the way it looks. Reds and purples tend to...





